The built-in camera may not work, be detected or show in Device Manager. Also, the error Bluetooth Video Service not running may be displayed when trying to access the camera using the ArcSoft® WebCam Companion™ software.

• Imaging Devices Missing Windows 10 Lenovo

Follow the procedure below to resolve the issue:

1. Click the Start button, and then click Control Panel.
2. In the Control Panel window, click System and Maintenance.
3. In the System and Maintenance window, click Device Manager.

   NOTE: If prompted for an administrator password or a User Account Control prompt is displayed, type the appropriate password or click Continue.

4. In the Device Manager window, click the plus (+) next to Imaging devices to expand the selection.

   NOTE: If Imaging devices is not listed, click to select a different category such as Computer and then proceed with Method 1 below.

5. Depending on the state of the Sony Visual Communication Camera device listed under Imaging devices, perform one of the following procedures.
   • Method 1: If Sony Visual Communication Camera is missing, follow the procedure below to resolve the issue:
     1. On the menu bar, click Action.
     2. Click to select Scan for hardware changes.

        NOTES:

        • Scan for hardware changes will automatically detect the camera hardware and install the necessary driver.Sony Visual Communication Camera will then show as properly installed, meaning that the device does not have a yellow exclamation point or question mark.

          NOTE: The camera should now function properly and after restarting the ArcSoft WebCam Companion software the error should not be displayed.

        • If Sony Visual Communication Camera is displayed with a yellow explanation point or question mark, follow the procedure in Method 3.
        • If Sony Visual Communication Camera still does not appear, service will be required. Go to Product Repair.
   • Method 2: If Sony Visual Communication Camera is disabled, follow the procedure below to enable it:
     1. Click to select Sony Visual Communication Camera.
     2. On the menu bar, click Action and then click Enable.

        NOTE: The camera should now function properly and after restarting the ArcSoft WebCam Companion software the error should not be displayed.

   • Method 3: If Sony Visual Communication Camera is displayed with a yellow explanation point or question mark, follow the procedure below:
     1. Click to select Sony Visual Communication Camera.
     2. On the menu bar, click Action, and then click Uninstall.
     3. In the Confirm Device Uninstall window, click the OK button.
     4. In the Device Manager window, on the menu bar, click Action and then click to select Scan for hardware changes.
     5. After the scan is complete, on the menu bar, click Action and then click to select Update Driver Software.
     6. In the Update Driver Software window, you will be prompted to manually or automatically install the driver. Select Search automatically for updated driver software and then follow the on-screen instructions.

        NOTE: The camera should now function properly and after restarting the ArcSoft WebCam Companion software the error should not be displayed.

Troubleshooting and additional information

Windows 10: Mice and other pointing devices missing from Device Manager Discus and support Mice and other pointing devices missing from Device Manager in Windows 10 Drivers and Hardware to solve the problem; My laptop is set for auto update. After an update loaded today my touchpad quit working. I tried several thing to turn it on but nothing worked. Imaging devices driver missing from Device manager after Windows 10 Update? Windows 10 Discussion in ' Windows 10 Forums ' started by Windows 10, Aug 29, 2016.

• How to configure and use the built-in camera .
• The webcam is not working or not detected in the operating system .

The Windows Device Manager is an important troubleshooting tool. It displays all your installed hardware devices and allows you to view which ones have problems, manage their drivers, and even disable specific pieces of hardware.

You should only need to use the Device Manager when troubleshooting your computer’s hardware and managing its drivers, but it’s an important system tool that you should know how to use.

Opening the Device Manager

The easiest way to open the Device Manager on any version of Windows is by pressing Windows Key + R, typing devmgmt.msc, and pressing Enter.

On Windows 10 or 8, you can also right-click in the bottom-left corner of your screen and select Device Manager. On Windows 7, you can open the Control Panel, click Hardware and Sound, and click Device Manager under Hardware and Printers.

Viewing Your Installed Hardware

By default, the Device Manager displays a list of your installed hardware, sorted by category. You can expand these categories to view which hardware you have installed in your computer. If you ever forget the exact model number of your video card or even your hard drive or DVD drive, you can quickly find that information in the device manager.

Note that some hardware devices don’t appear in this list by default. You can view them by clicking View and selecting Show hidden devices. This will display a variety of “non-plug and play drivers,” including low-level system drivers included with Windows and drivers installed by third-party software.

Windows does not display certain types of hidden devices, even when you enable the Show hidden devices option. “Ghosted” devices, such as USB devices that aren’t connected to your computer, will not appear in the list. To view them on Windows 7, Vista, or XP, you’ll have to launch the Device Manager in a special way.

First, open a Command Prompt window. Run the following commands in it:

set devmgr_show_nonpresent_devices=1

start devmgmt.msc

The Device Manager will open and will now show all hidden devices when you select Show hidden devices from the View menu. You can use this trick to remove drivers associated with your old, disconnected hardware. This hidden feature was removed in Windows 8, so viewing such “ghosted” devices is no longer possible.

Identify Devices That Aren’t Working Properly

To identify devices that aren’t working properly — possibly because of problems with their drivers — look for the yellow triangle containing an exclamation point over a device’s icon.

Right-click the device and select Properties to view more information about the problem. The problem could be a driver issue, a system resource conflict, or something else. If it’s a driver problem, you can generally install a new driver for it from the Driver tab in the Properties dialog.

Disable a Device

Let’s say you want to disable a device completely. Perhaps your laptop’s touchpad is malfunctioning and sending phantom events, moving your mouse cursor when you don’t want it to. Perhaps you never use your laptop’s webcam and you want to disable it at the system-level to be sure no malware can use your webcam to spy on you. Whatever your reason, you can disable individual hardware devices from the Device Manager.

As an example, let’s say we don’t like the annoying system beeps that come from our computer. These beeps come from the speaker on your computer’s motherboard. Crusader kings 2 spain guide.

To disable them, click the View menu and select Show hidden devices. Expand the Non-Plug and Play Drivers section, right-click the Beep driver, and select Properties.

Click the Driver tab and set the Startup Type to Disabled. You won’t hear beeps from within Windows anymore. (Note that, for most types of hardware devices, you can generally right-click them and select Disable to quickly disable them.)

This setting just affects Windows, so you may hear a beep while booting up. This is a troubleshooting feature that allows your motherboard to beep at you if problems occur.

Manage a Device’s Drivers

A device’s properties window contains information and settings that may be specific to that type of hardware. However, you shouldn’t need to look at most of the information or options here.

The settings that matter most for troubleshooting are the Driver settings. After right-clicking a device and selecting Properties, click the Driver tab. You’ll find information about the currently installed driver and buttons for controlling it.

• Driver Details: View details about the exact location of the driver files being used by the device on your system. You shouldn’t need this option.
• Update Driver: Install an updated driver. Windows allows you to search online for an updated driver or manually choose a driver that has been downloaded to your system, just as you can when installing devices normally. Searching for an updated driver may help if the driver is old and outdated. If you want to manually choose a custom, downloaded driver for a device, you’ll do it from here.
• Roll Back Driver: Revert to the driver the device was previously using. If you’ve updated the driver to a new version and the hardware isn’t working quite right, you should downgrade the driver. You could hunt down the old driver and manually install it, but this button provides a quick way to downgrade your driver. If this button is grayed out, the driver hasn’t been updated, so there’s no previous driver to roll back to.
• Disable: Disable the device, preventing it from working in Windows until you re-enable it.
• Uninstall: Uninstall the drivers associated with the device from your system. Note that this may not remove all driver files, so uninstalling the drivers from your Control Panel is a better idea, if this is possible. You may have to reboot your computer after doing this. This should only be necessary if you want to purge certain drivers from your system and try setting up the device and its drivers from scratch.

The Device Manager also warns you about resource conflicts, but you should see resource conflicts very rarely on modern systems. The above information should cover just about everything you would want to do with the Windows Device Manager.

Imaging Devices Missing Windows 10 Lenovo

• › How Do Internet Speed Tests Work? (and How Accurate Are They?)
• › How to Stream UFC 239 Jon Jones vs. Santos Online
• › How to Check Your Wi-Fi Signal Strength
• › What Is “Upscaling” on a TV, and How Does It Work?
• › How to See the Applications Using Your Network on Windows 10